IMPower Series™ System Highlights

Durable, easy to install and remarkably efficient, IMPower Series wall and roof panels simplify design and construction, and ensure a long-lasting high-performance building envelope.

IMPower Series™ System Features & Benefits
  • Single Component
    • Factory-injected foam insulation composited between dual steel facings to create a single high-strength insulated composite panel
    • Speeds installation and minimizes construction inefficiencies common to multi-component roof and wall systems
  • Continuous Insulation (C.I.)
    • Closed cell polyisocyanurate insulating core provides approximately R-8 per inch, far superior to traditional insulation materials
    • Panels create continuous insulation outboard of building framing, virtually eliminating thermal bridging and maximizing thermal efficiency
  • Continuous Air Barrier (C.A.B.)
    • Tightly interlocking tongue-and-groove panel joinery with non-curing butyl sealant create an airtight building envelope for maximum thermal performance and protection from moisture
  • Energy Efficient
    • High effective R-Values combined with continuous insulation and air barrier result in significant HVAC energy savings
    • Cool pigment technology in superior coating systems deliver SRI values that meet steep and/or low slope requirements for ENERGY STAR® and LEED®
  • Materially Efficient
    • Requires fewer material resources than multi-component assemblies
    • Panels have high strength-to-weight ratio, allowing for long spans and minimal structural requirements
    • Requires less insulation thickness to comply with building energy efficiency codes
  • Design Flexibility
    • Multiple profiles, colors, finishes, accessories and trims integrate into any building style
    • Wall panels install both vertically and horizontally 
    • Easily integrate with doors, windows, louvers and other building envelope components
  • Durable and Cost Effective
    • Long lasting building system proven in real world installations for 40+ years
    • No surface wet seals to maintain on wall joints
    • Requires minimal maintenance for reduced operational costs
    • PVDF and SMP coatings provide long-term weathering performance
  • Tested & Approved
    • Tested for compliance with North American industry standards and codes
    • Factory Mutual approved
    • Florida Building Code Approved
Experience the Fast Track to High Performance

Today's building products must provide a combination of measurable efficiency and creative versatility. IMPower Series™ Insulated Panels from Metal Sales deliver the superior thermal capabilities and excellent design flexibility that architects, owners and contractors demand. With a diverse array of profiles, textures and colors to choose from, IMPower Series systems are ideal for a wide array of building applications – from schools, corporate offices and high-end retailers to airplane hangars, warehouses and sports complexes.

System Components
Additional non-stock colors may be available. Contact your Metal Sales representative for more information.
Refine Results
Application
Fastener
Rib Height
Coverage
Product Series
Substrate Materials

Want to see real-time availability in your area and find a METAL SALES dealer near you? Add your ZIP code:

Contact an Expert

Have questions? We will connect you with a Metal Sales professional in your area!

Click Here

Liner, Wall

DM40 Double Mesa Wall • IMPower Series

Matching exterior and interior low linear mesa profiles make this panel particularly suited for thicker, long-length walls. Perfect for exterior or interior wall and ceiling applications on industrial buildings.

FEATURES AND BENEFITS

  • The low profile linear exterior surface simplifies flashing connections designed to inhibit moisture vapor transmission compared with other deep fluted products on the market
  • The additional mesa profile on the interior face makes this panel particularly suited for thicker, long-length walls
  • The panel’s overlapping joint is self-aligning and allows for easy sealant application at the panel joinery
  • The standard exterior metal surface is embossed 26 ga G-90 galvanized steel with standard PVDF and SMP exterior coatings (other coatings may be available)
  • The standard interior metal surface is embossed 26 ga Imperial White
  • The panel arrives on site in one piece and requires a simple one step installation reducing construction time and costs

PANEL COVERAGE: 40"
RIB HEIGHT:
STANDARD GAUGE: 26 ga.

Add to E-Submittal List

Liner, Wall

FL40 Flat Wall • IMPower Series

Create a beautifully finished high-performance building envelope with a single component using flat wall panels available in your choice of a smooth or light embossed metal face.

FEATURES AND BENEFITS

  • Can be installed either vertically or horizontally. The horizontal assembly incorporates a clean, simple end joint design that utilizes a unique self-aligning pre-painted aluminum extrusion
  • The panel’s overlapping joint is self-aligning and allows for easy sealant application at the panel joinery
  • The standard exterior metal surface is 22 ga (embossed) G-90 galvanized steel with standard PVDF and SMP exterior coatings (other coatings may be available)
  • The standard interior metal surface is embossed 26 ga Imperial White
  • The panel arrives on site in one piece and requires a simple one step installation reducing construction time and costs

PANEL COVERAGE: 40"
RIB HEIGHT:
STANDARD GAUGES: 22 Exterior ga., 26 Interior ga.

Add to E-Submittal List

Liner, Wall

HE40 Heavy Embossed Wall • IMPower Series

The textural quality of this Heavy Embossed profile adds a distinctive character to the exterior walls of industrial and commercial buildings. The heavy embossing also adds to the panel’s surface rigidity.

FEATURES AND BENEFITS

  • Heavy embossment adds rigidity to the surface and maintains a patterned flat appearance
  • The panel can be installed with a pre-painted finish or may be field sprayed with a textured or stucco-style elastrometric coating to create further character
  • The panel’s overlapping joint is self-aligning and allows for easy sealant application at the panel joinery
  • The standard exterior metal surface is 26 ga G-90 galvanized steel with standard PVDF and SMP exterior coatings (other coatings may be available).
  • The standard interior metal surface is 26 ga Imperial White
  • The panel arrives on site in one piece and requires a simple one step installation reducing construction time and costs.

PANEL COVERAGE: 40"
RIB HEIGHT:
STANDARD GAUGE: 26 ga.

Add to E-Submittal List

Liner, Wall

HE40A Adobe Texture™ Wall • IMPower Series

HE40A AdobeTexture™ wall system offers a multi-textured profile in a matte finish that delivers a bold stucco-like appearance. This texture comes standard on HE40A wall panels, eliminating the need for multi-step field-applied stucco coating for simple one-step installation. Matching AdobeTexture trim and finishing system provides a clean continuous look.

FEATURES AND BENEFITS

  • Proprietary breakthrough technology integrates a stucco look and texture into insulated wall panels
  • Eliminates the need for sprayed elastomeric coating applications or multi-step field-applied or additional factory-applied stucco coating
  • Matching AdobeTexture trim & finishing system for a clean, continuous look and feel
  • The standard interior metal surface is 26 ga Imperial White
  • Same easy, economical installation as standard IMP wall panels – Arrives on site in one piece for a simple one-step installation

PANEL COVERAGE: 40"
RIB HEIGHT:
STANDARD GAUGE: 26 ga.

Add to E-Submittal List

Roof

HR3 High Rib Roof • IMPower Series

This 3-rib exposed fastened roof panel installs quickly and easily into supporting structural members. An alternative to field-assembled high rib roof applications, the HR3 can shorten project schedules and minimize labor.

FEATURES AND BENEFITS

  • The panel’s overlapping joint is self-aligning and allows for easy sealant application at the panel joinery
  • The standard exterior metal surface is smooth 26 ga G-90 galvanized steel with standard PVDF and SMP exterior coatings (other coatings may be available)
  • The standard interior metal surface is embossed 26 ga Imperial White
  • The panel arrives on site in one piece and requires a simple one step installation reducing construction time and costs

PANEL COVERAGE: 40"
RIB HEIGHT: 1-3/8"
STANDARD GAUGE: 26 ga.

Add to E-Submittal List

Roof

SR2 Standing Seam Roof • IMPower Series

SR2 standing seam roof system provides the traditional look of trapezoidal metal standing seam roof with a built-in insulated core. This insulated panel is an efficient alternative to field-assembled roofing systems.

FEATURES AND BENEFITS

  • Field seamed, hidden fastener joinery provides maximum protection against the elements
  • The trapezoidal rib design provides added strength against potential foot traffic damage compared to other standing seam roof products
  • The standard exterior metal surface is smooth 26 ga G-90 galvanized steel with standard PVDF and SMP exterior coatings (other coatings may be available)
  • The standard interior metal surface is embossed 26 ga Imperial White
  • The panel arrives on site in one piece and requires a simple one-step installation reducing construction time and costs

PANEL COVERAGE: 40"
RIB HEIGHT: 2"
STANDARD GAUGE: 26 ga.

Add to E-Submittal List

Liner, Wall

ST40 Striated Wall • IMPower Series

This striated concealed fastened wall panel provides a flat and clean appearance to exterior and interior wall surfaces. The nominal embossed striations add rigidity and ensure an acceptable flatness tolerance.

FEATURES AND BENEFITS

  • The panel’s overlapping joint is self-aligning and allows for easy sealant application at the panel joinery
  • The standard exterior metal surface is embossed 26 ga G-90 galvanized steel with standard PVDF and SMP exterior coatings (other coatings may be available)
  • The standard interior metal surface is embossed 26 ga Imperial White
  • The panel arrives on site in one piece and requires a simple one step installation reducing construction time and costs

PANEL COVERAGE: 40"
RIB HEIGHT:
STANDARD GAUGE: 26 ga.

Add to E-Submittal List